Rocky Linuxの 9.6 ホストには、TuxCare ALMALINUX9.6:CLSA-2026:1780562693アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - 5.16.12より前の Linux カーネルで問題が発見されました。drivers/net/usb/sr9700.c では、攻撃者がデバイスから細工されたフレーム長を介してヒープメモリから機密情報を取得する可能性があります。(CVE-2022-26966)

  - Linux カーネルでは、以下の脆弱性が解決されています: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k
    __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r
    __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table.
    Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this.
    aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list :
    show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop :
    warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at
    __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130
    __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm:
    execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP:
    0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX:
    0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10:
    0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated--- (CVE-2022-50008)

  - Linux カーネルでは、以下の脆弱性が解決されています: tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx' When generate a synthetic event with many params and then create a trace action for it [1], kernel panic happened [2]. It is because that in trace_action_create() 'data->n_params' is up to SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx' keeps indices into array 'hist_data->var_refs' for each synthetic event param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX (current value is 16), so out-of-bound write happened when 'data->n_params' more than 16. In this case, 'data->match_data.event' is overwritten and eventually cause the panic. To solve the issue, adjust the length of 'data->var_ref_idx' to be SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write. [1] # cd /sys/kernel/tracing/ # echo my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28;
    int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51;
    int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63 >> synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm==bash' >> \ events/sched/sched_waking/trigger # echo hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\ pid,pid,pid,pid,pid,pid,pid,pid,pid) >> events/sched/sched_switch/trigger [2] BUG: unable to handle page fault for address: ffff91c900000000 PGD 61001067 P4D 61001067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU:
    2 PID: 322 Comm: bash Tainted: G W 6.1.0-rc8+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:strcmp+0xc/0x30 Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3 RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000 RBP: ffff91c900000000 R08: 00000018d604b529 R09:
    0000000000000000 R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580 R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538 FS: 00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff91c900000000 CR3:
    0000000006316000 CR4: 00000000000006e0 Call Trace: <TASK> __find_event_file+0x55/0x90 action_create+0x76c/0x1060 event_hist_trigger_parse+0x146d/0x2060 ? event_trigger_write+0x31/0xd0 trigger_process_regex+0xbb/0x110 event_trigger_write+0x6b/0xd0 vfs_write+0xc8/0x3e0 ? alloc_fd+0xc0/0x160 ? preempt_count_add+0x4d/0xa0 ? preempt_count_add+0x70/0xa0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f1d1d0cf077 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX:
    0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077 RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001 RBP: 00005639265aa7e0 R08: 000000000000000a R09:
    0000000000000142 R ---truncated--- (CVE-2022-50553)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done (CVE-2023-52887)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b (eth: sungem: remove .ndo_poll_controller to avoid deadlocks). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. (CVE-2024-38553)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

検出

Rocky Linux 9.6 [TuxCare] セキュリティ更新プログラム:kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etcの複数の脆弱性(ALMALINUX9.6:CLSA-2026:1780562693)

high Nessus プラグイン ID 361263

バージョン 1.2