リモートの SUSE Linux SLES15 / SLES_SAP15 ホストには、SUSE-SU-2025:02173-1 のアドバイザリに記載された複数の脆弱性の影響を受けるパッケージがインストールされています。

    SUSE Linux Enterprise 15 SP5 カーネルが更新され、さまざまなセキュリティバグ修正が行われています。


    次のセキュリティバグを修正しました。

    - CVE-2022-49775: tcp: cdg: tcp_cdg_release() を複数回呼び出すことを許可します (bsc#1242245)。
    - CVE-2024-53168: net: sock_inuse_add() を利用可能にします (bsc#1234887)。
    - CVE-2024-56558: nfsd: svc_export_show の前に exp がアクティブであることを確認します (bsc#1235100)。
    - CVE-2025-21999: proc: proc_get_inode() の UAF を修正します (bsc#1240802)。
    - CVE-2025-22056: netfilter: nft_tunnel: geneve_opt の型の混同に関する修正を追加 (bsc#1241525)。
    - CVE-2025-23145: mptcp: can_accept_new_subflow の NULL ポインターを修正します (bsc#1242596)。
    - CVE-2025-37789: net: openvswitch: set() アクションのネストされたキーの長さの検証を修正します (bsc#1242762)。
    - CVE-2024-28956:x86/its:ITS-safe indirect thunk のサポートを追加します(bsc#1242006)。
    - CVE-2025-37785: ext4: dotdot dir をチェックする際の OOB 読み取りを修正します (bsc#1241640)。


Tenable は、前述の記述ブロックを SUSE セキュリティアドバイザリから直接抽出しています。

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling amd_pmu_enable_all() does: if (!test_bit(idx, cpuc->active_mask)) continue; amd_pmu_enable_event(cpuc->events[idx]); A perf NMI of another event can come between these two steps. Perf NMI handler internally disables and enables _all_ events, including the one which nmi-intercepted amd_pmu_enable_all() was in process of enabling. If that unintentionally enabled event has very low sampling period and causes immediate successive NMI, causing the event to be throttled, cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop(). This will result in amd_pmu_enable_event() getting called with event=NULL when amd_pmu_enable_all() resumes after handling the NMIs. This causes a kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000198 #PF:
    supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] Call Trace: <TASK> amd_pmu_enable_all+0x68/0xb0 ctx_resched+0xd9/0x150 event_function+0xb8/0x130 ? hrtimer_start_range_ns+0x141/0x4a0 ? perf_duration_warn+0x30/0x30 remote_function+0x4d/0x60
    __flush_smp_call_function_queue+0xc4/0x500 flush_smp_call_function_queue+0x11d/0x1b0 do_idle+0x18f/0x2d0 cpu_startup_entry+0x19/0x20 start_secondary+0x121/0x160 secondary_startup_64_no_verify+0xe5/0xeb </TASK> amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler were recently added as part of BRS enablement but I'm not sure whether we really need them. We can just disable BRS in the beginning and enable it back while returning from NMI. This will solve the issue by not enabling those events whose active_masks are set but are not yet enabled in hw pmu. (CVE-2022-49781)

Nessus は、ベンダーによって報告されたパッケージの存在に依存していることに注意してください。

AlmaLinux 9.2 ホストには、TuxCare ALMALINUX9.2:CLSA-2026:1791741836アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at:
    https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries.
    (CVE-2022-48862)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause use after free error. This patch adds a vlan list lock to protect the vlan list. (CVE-2022-49182)

  - Linux カーネルでは、以下の脆弱性が解決されています: perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling amd_pmu_enable_all() does: if (!test_bit(idx, cpuc->active_mask)) continue; amd_pmu_enable_event(cpuc->events[idx]); A perf NMI of another event can come between these two steps. Perf NMI handler internally disables and enables _all_ events, including the one which nmi-intercepted amd_pmu_enable_all() was in process of enabling. If that unintentionally enabled event has very low sampling period and causes immediate successive NMI, causing the event to be throttled, cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop(). This will result in amd_pmu_enable_event() getting called with event=NULL when amd_pmu_enable_all() resumes after handling the NMIs. This causes a kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000198 #PF:
    supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] Call Trace: <TASK> amd_pmu_enable_all+0x68/0xb0 ctx_resched+0xd9/0x150 event_function+0xb8/0x130 ? hrtimer_start_range_ns+0x141/0x4a0 ? perf_duration_warn+0x30/0x30 remote_function+0x4d/0x60
    __flush_smp_call_function_queue+0xc4/0x500 flush_smp_call_function_queue+0x11d/0x1b0 do_idle+0x18f/0x2d0 cpu_startup_entry+0x19/0x20 start_secondary+0x121/0x160 secondary_startup_64_no_verify+0xe5/0xeb </TASK> amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler were recently added as part of BRS enablement but I'm not sure whether we really need them. We can just disable BRS in the beginning and enable it back while returning from NMI. This will solve the issue by not enabling those events whose active_masks are set but are not yet enabled in hw pmu. (CVE-2022-49781)

  - Linux カーネルでは、以下の脆弱性が解決されています: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's. (CVE-2022-50550)

  - Linux カーネルでは、以下の脆弱性が解決されています: usb: roles: fix NULL pointer issue when put module's reference In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. (CVE-2024-26747)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

ID	名前	製品	ファミリー	公開日	更新日	深刻度
241036	SUSE SLES15: Linux カーネルのセキュリティ更新 (SUSE-SU-2025:02173-1)	Nessus	SuSE Local Security Checks	2025/7/1	2026/9/29	medium
245500	Linux Distros のパッチ未適用の脆弱性: CVE-2022-49781	Nessus	Misc.	2025/8/7	2026/7/17	medium
364688	AlmaLinux 9.2 [TuxCare] セキュリティ更新:bpftool/kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etc 複数の脆弱性(ALMALINUX9.2:CLSA-2026:1791741836)	Nessus	Alma Linux Local Security Checks	2026/10/12	2026/10/13	critical

検出

プラグインの検索

medium

medium

critical