CentOS Linux 8ホストには、TuxCare CENTOS-STREAM8:CLSA-2026:1783790425アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - netfilter の欠陥により、ネットワークに接続された攻撃者が openvpn 接続のエンドポイント情報を推測し、従来のネットワーク攻撃でさらに使用される可能性があります。(CVE-2021-3773)

  - プロキシされた仮想の TPM デバイスの Linux カーネルの実装に欠陥が見つかりました。仮想 TPM デバイスが設定されているシステム (これはデフォルトではありません) で、ローカルの攻撃者が use-after-free を作成し、システムの権限を昇格できる状況を作り出す可能性があります。(CVE-2022-2977)

  - Linux カーネルでは、以下の脆弱性が解決されています: tracing: Free buffers when a used dynamic event is removed After 65536 dynamic events have been added and removed, the type field of the event then uses the first type number that is available (not currently used by other events). A type number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be created and destroyed), if another dynamic event is created that has the same number that new event's logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will remove the old event and create a new one (with the same format) and increase the type number to the next available on until the type number reaches over 65535 which is the max number for the 16 bit type. After it reaches that number, the logic to allocate a new number simply looks for the next available number.
    When an dynamic event is removed, that number is then available to be reused by the next dynamic event created. That is, once the above reaches the max number, the number assigned to the event in that loop will remain the same. Now that means deleting one dynamic event and created another will reuse the previous events type number. This is where bad things can happen. After the above loop finishes, the kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 > kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo:
    (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo:
    (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1= ---truncated--- (CVE-2022-49006)

  - Linux カーネルでは、以下の脆弱性が解決されています: tracing: Fix wild-memory-access in register_synth_event() In register_synth_event(), if set_synth_event_print_fmt() failed, then both trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event
    __unregister_trace_event (second call) Fix the bug by avoiding to call the second
    __unregister_trace_event() by checking if the first one is called. general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted 6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code:
    00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP:
    0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000 RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08:
    0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122 R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
    00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK>
    __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250 synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test] synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd (CVE-2022-49799)

  - Linux カーネルでは、以下の脆弱性が解決されています: ata: libata-transport: fix double ata_host_put() in ata_tport_add() In the error path in ata_tport_add(), when calling put_device(), ata_tport_release() is called, it will put the refcount of 'ap->host'. And then ata_host_put() is called again, the refcount is decreased to 0, ata_host_release() is called, all ports are freed and set to null.
    When unbinding the device after failure, ata_host_stop() is called to release the resources, it leads a null-ptr-deref(), because all the ports all freed and null. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc :
    ata_host_stop+0x3c/0x84 [libata] lr : release_nodes+0x64/0xd0 Call trace: ata_host_stop+0x3c/0x84 [libata] release_nodes+0x64/0xd0 devres_release_all+0xbc/0x1b0 device_unbind_cleanup+0x20/0x70 really_probe+0x158/0x320 __driver_probe_device+0x84/0x120 driver_probe_device+0x44/0x120
    __driver_attach+0xb4/0x220 bus_for_each_dev+0x78/0xdc driver_attach+0x2c/0x40 bus_add_driver+0x184/0x240 driver_register+0x80/0x13c __pci_register_driver+0x4c/0x60 ahci_pci_driver_init+0x30/0x1000 [ahci] Fix this by removing redundant ata_host_put() in the error path. (CVE-2022-49826)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

検出

CentOS Linux 8 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-core/kernel-cross-headers/etcの複数の脆弱性(CENTOS-STREAM8:CLSA-2026:1783790425)

critical Nessus プラグイン ID 352893

変更ログが見つかりません