AlmaLinux 9.2 ホストには、TuxCare ALMALINUX9.2:CLSA-2026:1792243434アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: ethernet: hisilicon: hns:
    hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
    because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. (CVE-2021-47548)

  - Linux カーネルでは、以下の脆弱性が解決されています: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ?
    __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ?
    __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969]
    __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX:
    0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP:
    00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated--- (CVE-2023-52623)

  - Linux カーネルでは、以下の脆弱性が解決されています: dm: call the resume method on internal suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the hash_list entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the resume and postsuspend methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP:
    0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX:
    000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10:
    0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ?
    __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]--- (CVE-2024-26880)

  - Linux カーネルでは、以下の脆弱性が解決されています: netfilter: nf_tables: flush pending destroy work before exit_net release Similar to 2c9f0293280e (netfilter: nf_tables: flush pending destroy work before netlink notifier) to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ?
    __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ?
    __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ?
    __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750]
    __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953]
    ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036]
    __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list
    *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list);
    11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat
    ---truncated--- (CVE-2024-35899)

  - Linux カーネルでは、以下の脆弱性が解決されています: drm/client: Fully protect modes[] with dev->mode_config.mutex The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory. (CVE-2024-35950)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

AlmaLinux 9.6 ホストには、TuxCare ALMALINUX9.6:CLSA-2026:1793100968アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: udf: Avoid double brelse() in udf_rename() syzbot reported a warning like below [1]: VFS: brelse: Trying to free free buffer WARNING:
    CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0 ... Call Trace: <TASK> invalidate_bh_lru+0x99/0x150 smp_call_function_many_cond+0xe2a/0x10c0 ? generic_remap_file_range_prep+0x50/0x50 ? __brelse+0xa0/0xa0 ? __mutex_lock+0x21c/0x12d0 ? smp_call_on_cpu+0x250/0x250 ? rcu_read_lock_sched_held+0xb/0x60 ? lock_release+0x587/0x810 ?
    __brelse+0xa0/0xa0 ? generic_remap_file_range_prep+0x50/0x50 on_each_cpu_cond_mask+0x3c/0x80 blkdev_flush_mapping+0x13a/0x2f0 blkdev_put_whole+0xd3/0xf0 blkdev_put+0x222/0x760 deactivate_locked_super+0x96/0x160 deactivate_super+0xda/0x100 cleanup_mnt+0x222/0x3d0 task_work_run+0x149/0x240 ? task_work_cancel+0x30/0x30 do_exit+0xb29/0x2a40 ? reacquire_held_locks+0x4a0/0x4a0 ? do_raw_spin_lock+0x12a/0x2b0 ? mm_update_next_owner+0x7c0/0x7c0 ? rwlock_bug.part.0+0x90/0x90 ? zap_other_threads+0x234/0x2d0 do_group_exit+0xd0/0x2a0
    __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that brelse() is called on both ofibh.sbh and ofibh.ebh by udf_find_entry() when it returns NULL. However, brelse() is called by udf_rename(), too. So, b_count on buffer_head becomes unbalanced. This patch fixes the issue by not calling brelse() by udf_rename() when udf_find_entry() returns NULL. (CVE-2022-50755)

  - Linux カーネルでは、以下の脆弱性が解決されています: soc: qcom: qmi_encdec: Restrict string length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of bounds access when the NULL character is appended in decoding. (CVE-2023-53729)

  - Linux カーネルでは、以下の脆弱性が解決されています: can: isotp: check CAN address family in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field:
    bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. (CVE-2023-54105)

  - Linux カーネルでは、以下の脆弱性が解決されています: usb: rndis_host: Secure rndis_query check against int overflow Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. (CVE-2023-54110)

  - Linux カーネルでは、以下の脆弱性が解決されています: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type.
    When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds.
    [ta: refine changes, new commit message, fix compilation error] (CVE-2023-54295)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

CentOS Linux 8.4 ホストには、TuxCare CENTOS8.4:CLSA-2026:1792749577アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: cifs: fix session state check in reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it complete the cifs_free_ipc() and logoff() and then delete itself from the list. (CVE-2023-53794)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list().
    The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.
    (CVE-2026-43503)

  - Linux カーネルでは、以下の脆弱性が解決されています: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).
    (CVE-2026-45856)

  - Linux カーネルでは、以下の脆弱性が解決されています: crypto: authencesn - reject short ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null), exposed authencesn instances whose default authsize was invalid even though setauthsize() would have rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range 1..3 so that no tfm can inherit an unsupported default authsize. (CVE-2026-46033)

  - Linux カーネルでは、以下の脆弱性が解決されています: RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size() underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE. (CVE-2026-46043)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

CentOS Linux 8.5 ホストには、TuxCare CENTOS8.5:CLSA-2026:1792750763アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: RDMA: Fix use-after-free in rxe_queue_cleanup On error handling path in rxe_qp_from_init() qp->sq.queue is freed and then rxe_create_qp() will drop last reference to this object. qp clean up function will try to free this queue one time and it causes UAF bug. Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init().
    (CVE-2021-47616)

  - Linux カーネルでは、以下の脆弱性が解決されています: mrp: introduce active flags to prevent UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no this synchronization, there is a small probability that the cancellation will not be successful. And syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256 Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395 kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320 do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749 do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367 el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627 call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4 kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not restart. (CVE-2022-50697)

  - Linux カーネルでは、以下の脆弱性が解決されています: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line lockdep_assert_held_write(&vma->anon_vma->root->rwsem). It can also lead to use-after-free access.
    (CVE-2023-52935)

  - Linux カーネルでは、以下の脆弱性が解決されています: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free.
    WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e (CVE-2024-53174)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list().
    The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.
    (CVE-2026-43503)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - drm/amd/display:CRTC リセット関数のダングリングポインターを修正します amdgpu_dm_crtc_reset_state() は、新しい状態を割り当てる前に古い状態を解放します。kzalloc() が失敗すると、この関数は状態ポインターを更新せずに返り、既に解放されたメモリへのダングリングポインターが残ります。最初に新しい状態を割り当ててこれを修正します。
    割り当てエラー時、古い状態はそのまま残り、関数は安全に返されます。SVACE とともに Linux Verification Center(linuxtesting.org)により発見されました。[現在の amd-staging-drm-next 周辺の動きの調整](CVE-2026-93175)

Nessus は、ベンダーから報告されたパッケージの存在に依存していることに注意してください。

Rocky Linuxの 9.6 ホストには、TuxCare ALMALINUX9.6:CLSA-2026:1793100968アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: udf: Avoid double brelse() in udf_rename() syzbot reported a warning like below [1]: VFS: brelse: Trying to free free buffer WARNING:
    CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0 ... Call Trace: <TASK> invalidate_bh_lru+0x99/0x150 smp_call_function_many_cond+0xe2a/0x10c0 ? generic_remap_file_range_prep+0x50/0x50 ? __brelse+0xa0/0xa0 ? __mutex_lock+0x21c/0x12d0 ? smp_call_on_cpu+0x250/0x250 ? rcu_read_lock_sched_held+0xb/0x60 ? lock_release+0x587/0x810 ?
    __brelse+0xa0/0xa0 ? generic_remap_file_range_prep+0x50/0x50 on_each_cpu_cond_mask+0x3c/0x80 blkdev_flush_mapping+0x13a/0x2f0 blkdev_put_whole+0xd3/0xf0 blkdev_put+0x222/0x760 deactivate_locked_super+0x96/0x160 deactivate_super+0xda/0x100 cleanup_mnt+0x222/0x3d0 task_work_run+0x149/0x240 ? task_work_cancel+0x30/0x30 do_exit+0xb29/0x2a40 ? reacquire_held_locks+0x4a0/0x4a0 ? do_raw_spin_lock+0x12a/0x2b0 ? mm_update_next_owner+0x7c0/0x7c0 ? rwlock_bug.part.0+0x90/0x90 ? zap_other_threads+0x234/0x2d0 do_group_exit+0xd0/0x2a0
    __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that brelse() is called on both ofibh.sbh and ofibh.ebh by udf_find_entry() when it returns NULL. However, brelse() is called by udf_rename(), too. So, b_count on buffer_head becomes unbalanced. This patch fixes the issue by not calling brelse() by udf_rename() when udf_find_entry() returns NULL. (CVE-2022-50755)

  - Linux カーネルでは、以下の脆弱性が解決されています: soc: qcom: qmi_encdec: Restrict string length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of bounds access when the NULL character is appended in decoding. (CVE-2023-53729)

  - Linux カーネルでは、以下の脆弱性が解決されています: can: isotp: check CAN address family in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field:
    bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the userspace should be notified about the wrong address family field content. (CVE-2023-54105)

  - Linux カーネルでは、以下の脆弱性が解決されています: usb: rndis_host: Secure rndis_query check against int overflow Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. (CVE-2023-54110)

  - Linux カーネルでは、以下の脆弱性が解決されています: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type.
    When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds.
    [ta: refine changes, new commit message, fix compilation error] (CVE-2023-54295)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

ID	名前	製品	ファミリー	公開日	更新日	深刻度
366778	AlmaLinux 9.2 [TuxCare] セキュリティ更新:bpftool/kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etc 複数の脆弱性(ALMALINUX9.2:CLSA-2026:1792243434)	Nessus	Alma Linux Local Security Checks	2026/10/17	2026/10/27	medium
373062	AlmaLinux 9.6 [TuxCare] セキュリティ更新プログラム:kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etcの複数の脆弱性(ALMALINUX9.6:CLSA-2026:1793100968)	Nessus	Alma Linux Local Security Checks	2026/10/28	2026/10/28	high
371225	CentOS Linux 8.4 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-core/kernel-cross-headers/etcの複数の脆弱性(CENTOS8.4:CLSA-2026:1792749577)	Nessus	CentOS Local Security Checks	2026/10/23	2026/10/26	high
371224	CentOS Linux 8.5 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-core/kernel-cross-headers/etcの複数の脆弱性(CENTOS8.5:CLSA-2026:1792750763)	Nessus	CentOS Local Security Checks	2026/10/23	2026/10/26	high
347811	Linux Distros のパッチ未適用の脆弱性: CVE-2026-93175	Nessus	Misc.	2026/9/18	2026/11/6	high
373068	Rocky Linux 9.6 [TuxCare] セキュリティ更新プログラム:kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etcの複数の脆弱性(ALMALINUX9.6:CLSA-2026:1793100968)	Nessus	Rocky Linux Local Security Checks	2026/10/28	2026/10/28	high

検出

プラグインの検索

medium

high

high

high

high

high