The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointed out that     there are a few lockless RCU readers using test_bit() which is a relaxed atomic operation and provides no     memory barrier guarantees. Use test_bit_acquire() instead where the operation may run parallel with     add/del/gc, i.e. is not one from the next cases - protected by region lock - in a set destroy phase - in a     new/temporary set creation phase (CVE-2026-72436)

Note that Nessus relies on the presence of the package as reported by the vendor.

An update of the linux package has been released.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1793321383 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access     after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check     to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8     22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60     [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8     22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0     [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8     22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8     22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ?     aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8     22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ?     process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected     PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262:
    dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5     mb[0-3]=[0xffff 0xffff 0xffff 0xffff] (CVE-2022-49157)

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix DMA transfer     direction When CONFIG_DMA_API_DEBUG is selected, while running the crypto self test on the QAT crypto     algorithms, the function add_dma_entry() reports a warning similar to the one below, saying that     overlapping mappings are not supported. This occurs in tests where the input and the output scatter list     point to the same buffers (i.e. two different scatter lists which point to the same chunks of memory). The     logic that implements the mapping uses the flag DMA_BIDIRECTIONAL for both the input and the output     scatter lists which leads to overlapped write mappings. These are not supported by the DMA layer. Fix by     specifying the correct DMA transfer directions when mapping buffers. For in-place operations where the     input scatter list matches the output scatter list, buffers are mapped once with DMA_BIDIRECTIONAL,     otherwise input buffers are mapped using the flag DMA_TO_DEVICE and output buffers are mapped with     DMA_FROM_DEVICE. Overlapping a read mapping with a write mapping is a valid case in dma-coherent devices     like QAT. The function that frees and unmaps the buffers, qat_alg_free_bufl() has been changed accordingly     to the changes to the mapping function. DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping     mappings aren't supported WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270     ... Call Trace: dma_map_page_attrs+0x82/0x2d0 ? preempt_count_add+0x6a/0xa0     qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat] qat_alg_aead_dec+0x71/0x250 [intel_qat]     crypto_aead_decrypt+0x3d/0x70 test_aead_vec_cfg+0x649/0x810 ? number+0x310/0x3a0 ? vsnprintf+0x2a3/0x550 ?     scnprintf+0x42/0x70 ? valid_sg_divisions.constprop.0+0x86/0xa0 ? test_aead_vec+0xdf/0x120     test_aead_vec+0xdf/0x120 alg_test_aead+0x185/0x400 alg_test+0x3d8/0x500 ?     crypto_acomp_scomp_free_ctx+0x30/0x30 ? __schedule+0x32a/0x12a0 ? ttwu_queue_wakelist+0xbf/0x110 ?
    _raw_spin_unlock_irqrestore+0x23/0x40 ? try_to_wake_up+0x83/0x570 ? _raw_spin_unlock_irqrestore+0x23/0x40     ? __set_cpus_allowed_ptr_locked+0xea/0x1b0 ? crypto_acomp_scomp_free_ctx+0x30/0x30     cryptomgr_test+0x27/0x50 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30     (CVE-2022-50774)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK     in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware     (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid     the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all     chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to     the device. (CVE-2023-53715)

  - In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-     loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID     which was stored by the last successful allocation. This is done in a loop searching the ID space for a     free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But     that's racy vs. establishing the starting point. That is read out lockless, which leads to the following     problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add()     if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a     negative start value, i.e. -1, and the loop break never happens because the condition can never be true:
    if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the     ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry     unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock.
    (CVE-2023-53728)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Ubuntu 24.04 LTS / 26.04 LTS host has a package installed that is affected by multiple vulnerabilities as referenced in the USN-8816-1 advisory.

    Several security issues were discovered in the Linux kernel. An attacker could possibly use these to     compromise the system. This update corrects flaws in the following subsystems:

    - ARM64 architecture;

    - S390 architecture;

    - x86 architecture;

    - DRBD Distributed Replicated Block Device drivers;

    - InfiniBand drivers;

    - IOMMU subsystem;

    - Multiple devices driver;

    - Network drivers;

    - Microsoft Azure Network Adapter (MANA) driver;

    - NVME drivers;

    - TCM subsystem;

    - Virtio Host (VHOST) subsystem;

    - Xen hypervisor drivers;

    - AFS file system;

    - File systems infrastructure;

    - Network file systems library;

    - Network file system (NFS) client;

    - NTFS3 file system;

    - OCFS2 file system;

    - OrangeFS file system;

    - SMB network file system;

    - IPv4 networking;

    - Sun RPC protocol;

    - IPv6 networking;

    - IP tunnels definitions;

    - Netfilter;

    - TCP network protocol;

    - Locking primitives;

    - 9P file system network protocol;

    - B.A.T.M.A.N. meshing protocol;

    - Networking core;

    - IFE protocol;

    - RxRPC session sockets;

    - Network traffic control;

    - SCTP protocol;

    - SMC sockets;

    - TIPC protocol;

    - XFRM subsystem; (CVE-2026-64530, CVE-2026-64534, CVE-2026-64535, CVE-2026-64541, CVE-2026-64551,     CVE-2026-68083, CVE-2026-68457, CVE-2026-68476, CVE-2026-68477, CVE-2026-72014, CVE-2026-72020,     CVE-2026-72033, CVE-2026-72041, CVE-2026-72046, CVE-2026-72064, CVE-2026-72065, CVE-2026-72069,     CVE-2026-72083, CVE-2026-72084, CVE-2026-72085, CVE-2026-72098, CVE-2026-72129, CVE-2026-72130,     CVE-2026-72137, CVE-2026-72139, CVE-2026-72191, CVE-2026-72192, CVE-2026-72194, CVE-2026-72217,     CVE-2026-72220, CVE-2026-72221, CVE-2026-72222, CVE-2026-72226, CVE-2026-72234, CVE-2026-72248,     CVE-2026-72249, CVE-2026-72251, CVE-2026-72277, CVE-2026-72278, CVE-2026-72279, CVE-2026-72287,     CVE-2026-72288, CVE-2026-72289, CVE-2026-72296, CVE-2026-72299, CVE-2026-72317, CVE-2026-72318,     CVE-2026-72319, CVE-2026-72320, CVE-2026-72322, CVE-2026-72323, CVE-2026-72329, CVE-2026-72339,     CVE-2026-72348, CVE-2026-72351, CVE-2026-72355, CVE-2026-72366, CVE-2026-72381, CVE-2026-72393,     CVE-2026-72398, CVE-2026-72399, CVE-2026-72412, CVE-2026-72417, CVE-2026-72422, CVE-2026-72429,     CVE-2026-72436, CVE-2026-72442, CVE-2026-72451, CVE-2026-72463, CVE-2026-72466, CVE-2026-72472,     CVE-2026-72473, CVE-2026-72477, CVE-2026-72491, CVE-2026-72493, CVE-2026-72494, CVE-2026-72495,     CVE-2026-72496, CVE-2026-72501, CVE-2026-74255, CVE-2026-74267, CVE-2026-74268, CVE-2026-74269,     CVE-2026-74287, CVE-2026-74310, CVE-2026-74345, CVE-2026-74350, CVE-2026-74361, CVE-2026-74376,     CVE-2026-74384, CVE-2026-74394, CVE-2026-74398, CVE-2026-74401, CVE-2026-74406, CVE-2026-74427,     CVE-2026-74428, CVE-2026-74433, CVE-2026-74434, CVE-2026-74436, CVE-2026-74439, CVE-2026-80665)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	名前	製品	ファミリー	公開日	更新日	深刻度
335691	Linux Distros Unpatched Vulnerability : CVE-2026-72436	Nessus	Misc.	2026/8/15	2026/11/7	critical
365768	Ubuntu 26.04 LTS : Linux kernel (Azure) vulnerabilities (USN-8888-1)	Nessus	Ubuntu Local Security Checks	2026/10/14	2026/10/14	medium
334784	Photon OS 5.0: Linux PHSA-2026-5.0-92-0952	Nessus	PhotonOS Local Security Checks	2026/8/12	2026/11/3	high
376875	EulerOS 2.0 SP12 : kernel (EulerOS-SA-2026-4411)	Nessus	Huawei Local Security Checks	2026/11/6	2026/11/6	high
375672	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1793321383)	Nessus	CentOS Local Security Checks	2026/11/3	2026/11/3	high
337226	Amazon Linux 2023 : bpftool, kernel, kernel-devel (ALAS2023-2026-2058)	Nessus	Amazon Linux Local Security Checks	2026/8/18	2026/9/10	high
365525	Ubuntu 24.04 LTS : Linux kernel (Azure) vulnerabilities (USN-8918-1)	Nessus	Ubuntu Local Security Checks	2026/10/14	2026/10/14	medium
341880	Amazon Linux 2023 : bpftool6.18, kernel6.18, kernel6.18-devel (ALAS2023-2026-2071)	Nessus	Amazon Linux Local Security Checks	2026/8/31	2026/9/15	high
350177	Ubuntu 24.04 LTS / 26.04 LTS : Linux kernel vulnerabilities (USN-8816-1)	Nessus	Ubuntu Local Security Checks	2026/9/25	2026/9/30	critical
375639	Photon OS 5.0: Linux PHSA-2026-5.0-91-0960	Nessus	PhotonOS Local Security Checks	2026/11/3	2026/11/5	high

検出

プラグインの検索

critical

medium

high

high

high

high

medium

high

critical

high