The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1793786843 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: soc: qcom: qmi_encdec: Restrict string     length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null     terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of     bounds access when the NULL character is appended in decoding. (CVE-2023-53729)

  - In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors     tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN:
    global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr     ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0     ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200     trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0     This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata     definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g.
    the next automaton's data in this case). The error is harmless as, while printing the string, we stop at     the null terminator, but it should still be fixed. Use the __string facilities while defining the     tracepoints to avoid reading out of bound memory. (CVE-2025-38636)

  - In the Linux kernel, the following vulnerability has been resolved: perf: arm_spe: Prevent overflow in     PERF_IDX2OFF() Cast nr_pages to unsigned long to avoid overflow when handling large AUX buffer sizes (>= 2     GiB). (CVE-2025-40081)

  - In the Linux kernel, the following vulnerability has been resolved: arch_topology: Fix incorrect error     check in topology_parse_cpu_capacity() Fix incorrect use of PTR_ERR_OR_ZERO() in     topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic     uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to     potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation,     PTR_ERR_OR_ZERO(ptr) returns: The error code within @ptr if it is an error pointer; 0 otherwise. This     means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore     !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing     clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk)     which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate().
    (CVE-2025-40346)

  - In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Add support for     Van Gogh SoC The ROG Xbox Ally (non-X) SoC features a similar architecture to the Steam Deck. While the     Steam Deck supports S3 (s2idle causes a crash), this support was dropped by the Xbox Ally which only S0ix     suspend. Since the handler is missing here, this causes the device to not suspend and the AMD GPU driver     to crash while trying to resume afterwards due to a power hang. (CVE-2025-68334)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793370479 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix buffer overflow in     debugfs If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately,     this is debugfs so it's limited to root users. (CVE-2025-38317)

  - In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Clear all LMTT pages on     alloc Our LMEM buffer objects are not cleared by default on alloc and during VF provisioning we only setup     LMTT PTEs for the actually provisioned LMEM range. But beyond that valid range we might leave some stale     data that could either point to some other VFs allocations or even to the PF pages. Explicitly clear all     new LMTT page to avoid the risk that a malicious VF would try to exploit that gap. While around add     asserts to catch any undesired PTE overwrites and low-level debug traces to track LMTT PT life-cycle.
    (cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) (CVE-2025-38511)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in     ath12k_service_ready_ext_event Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps is     not freed in the failure case, causing a memory leak. The following trace is observed in kmemleak:
    unreferenced object 0xffff8b3eb5789c00 (size 1024): comm softirq, pid 0, jiffies 4294942577 hex dump     (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00     01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410     ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]     ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]     ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k]     ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]     ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0     tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 Free     svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak. Tested-on: QCN9274 hw2.0 PCI     WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 (CVE-2025-39890)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak
    __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic     to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs     outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent     BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on     vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue     was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The     latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via     skb_dst_set() without dropping an existing one first. (CVE-2025-40183)

  - In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix neighbour     use-after-free We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems     to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A     reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting     scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a     referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop     already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without     this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free     in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3     UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name:
    Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0     print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110     mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510     mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0
    __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0     mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150     call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210     netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0     do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90     netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90
    __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0     do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109:
    kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90
    __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90     mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960     mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0     mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0     mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40     kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154:
    kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60
    __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260     kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0     ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation:
    kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0     mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40     kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 (CVE-2025-68801)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped     address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and     the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr     and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an     uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is     not affected. Zero-initialise new_addr. (CVE-2026-98322)

Note that Nessus relies on the presence of the package as reported by the vendor.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6568 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6568-1                   security@debian.org     https://www.debian.org/security/                     Salvatore Bonaccorso     October 16, 2026                      https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : linux     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For the stable distribution (trixie), these problems have been fixed in     version 6.12.113-1.

    We recommend that you upgrade your linux packages.

    For the detailed security status of linux please refer to its security     tracker page at:
    https://security-tracker.debian.org/tracker/linux

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	名前	製品	ファミリー	公開日	更新日	深刻度
376443	Ubuntu 24.04 LTS / 26.04 LTS : Linux kernel vulnerabilities (USN-8959-1)	Nessus	Ubuntu Local Security Checks	2026/11/5	2026/11/5	high
376201	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1793786843)	Nessus	Alma Linux Local Security Checks	2026/11/5	2026/11/5	high
374300	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793370479)	Nessus	Rocky Linux Local Security Checks	2026/10/30	2026/10/30	high
363351	Linux Distros Unpatched Vulnerability : CVE-2026-98322	Nessus	Misc.	2026/10/6	2026/11/6	medium
365258	Amazon Linux 2023 : bpftool6.18, kernel6.18, kernel6.18-devel (ALAS2023-2026-3192)	Nessus	Amazon Linux Local Security Checks	2026/10/12	2026/10/29	high
366507	Debian dsa-6568 : ata-modules-6.12.111+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	2026/10/16	2026/10/19	high

検出

プラグインの検索

high

high

high

medium

high

high