According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands.(CVE-2015-5194)

  - It was found that ntpd would exit with a segmentation     fault when a statistics type that was not enabled     during compilation (e.g. timingstats) was referenced by     the statistics or filegen configuration     command.(CVE-2015-5195)

  - It was found that NTP's :config command could be used     to set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals).(CVE-2015-5196)

  - It was discovered that the sntp utility could become     unresponsive due to being caught in an infinite loop     when processing a crafted NTP packet.(CVE-2015-5219)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7691)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7692)

  - A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd was configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory.(CVE-2015-7701)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7702)

  - It was found that NTP's :config command could be used     to set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals).(CVE-2015-7703)

  - An off-by-one flaw, leading to a buffer overflow, was     found in cookedprint functionality of ntpq. A specially     crafted NTP packet could potentially cause ntpq to     crash.(CVE-2015-7852)

  - A flaw was found in the way NTP verified trusted keys     during symmetric key authentication. An authenticated     client (A) could use this flaw to modify a packet sent     between a server (B) and a client (C) using a key that     is different from the one known to the client     (A).(CVE-2015-7974)

  - A NULL pointer dereference flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could potentially use this flaw to     crash ntpd.(CVE-2015-7977)

  - A stack-based buffer overflow flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could use this flaw to crash     ntpd.(CVE-2015-7978)

  - It was found that when NTP was configured in broadcast     mode, a remote attacker could broadcast packets with     bad authentication to all clients. The clients, upon     receiving the malformed packets, would break the     association with the broadcast server, causing them to     become out of sync over a longer period of     time.(CVE-2015-7979)

  - A flaw was found in the way the ntpq client processed     certain incoming packets in a loop in the getresponse()     function. A remote attacker could potentially use this     flaw to crash an ntpq client instance.(CVE-2015-8158)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Security Fix(es) :

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A remote     attacker could use a specially crafted NTP packet to     crash ntpd. (CVE-2015-7691, CVE-2015-7692,     CVE-2015-7702)

  - A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd was configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory. (CVE-2015-7701)

  - An off-by-one flaw, leading to a buffer overflow, was     found in cookedprint functionality of ntpq. A specially     crafted NTP packet could potentially cause ntpq to     crash. (CVE-2015-7852)

  - A NULL pointer dereference flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could potentially use this flaw to crash     ntpd. (CVE-2015-7977)

  - A stack-based buffer overflow flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could use this flaw to crash ntpd.
    (CVE-2015-7978)

  - It was found that when NTP was configured in broadcast     mode, a remote attacker could broadcast packets with bad     authentication to all clients. The clients, upon     receiving the malformed packets, would break the     association with the broadcast server, causing them to     become out of sync over a longer period of time.
    (CVE-2015-7979)

  - It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands. (CVE-2015-5194)

  - It was found that ntpd would exit with a segmentation     fault when a statistics type that was not enabled during     compilation (e.g. timingstats) was referenced by the     statistics or filegen configuration command.
    (CVE-2015-5195)

  - It was found that NTP's :config command could be used to     set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals). (CVE-2015-5196, CVE-2015-7703)

  - It was discovered that the sntp utility could become     unresponsive due to being caught in an infinite loop     when processing a crafted NTP packet. (CVE-2015-5219)

  - A flaw was found in the way NTP verified trusted keys     during symmetric key authentication. An authenticated     client (A) could use this flaw to modify a packet sent     between a server (B) and a client (C) using a key that     is different from the one known to the client (A).
    (CVE-2015-7974)

  - A flaw was found in the way the ntpq client processed     certain incoming packets in a loop in the getresponse()     function. A remote attacker could potentially use this     flaw to crash an ntpq client instance. (CVE-2015-8158)

The CVE-2015-5219 and CVE-2015-7703 issues were discovered by Miroslav Lichvr (Red Hat).

Additional Changes :

This update for ntp fixes the following issues :

ntp was updated to 4.2.8p9.

Security issues fixed :

  - CVE-2016-9311, CVE-2016-9310, bsc#1011377: Mode 6     unauthenticated trap information disclosure and DDoS     vector.

  - CVE-2016-7427, bsc#1011390: Broadcast Mode Replay     Prevention DoS.

  - CVE-2016-7428, bsc#1011417: Broadcast Mode Poll Interval     Enforcement DoS.

  - CVE-2016-7431, bsc#1011395: Regression: 010-origin: Zero     Origin Timestamp Bypass.

  - CVE-2016-7434, bsc#1011398: NULL pointer dereference in
    _IO_str_init_static_internal().

  - CVE-2016-7429, bsc#1011404: Interface selection attack.

  - CVE-2016-7426, bsc#1011406: Client rate limiting and     server responses.

  - CVE-2016-7433, bsc#1011411: Reboot sync calculation     problem.

  - CVE-2015-5219: An endless loop due to incorrect     precision to double conversion (bsc#943216).

Non-security issues fixed :

  - Fix a spurious error message.

  - Other bugfixes, see     /usr/share/doc/packages/ntp/ChangeLog.

  - Fix a regression in 'trap' (bsc#981252).

  - Reduce the number of netlink groups to listen on for     changes to the local network setup (bsc#992606).

  - Fix segfault in 'sntp -a' (bsc#1009434).

  - Silence an OpenSSL version warning (bsc#992038).

  - Make the resolver task change user and group IDs to the     same values as the main task. (bsc#988028)

  - Simplify ntpd's search for its own executable to prevent     AppArmor warnings (bsc#956365).

This update was imported from the SUSE:SLE-12-SP1:Update update project.

As discussed upstream, a flaw was found in the way ntpd processed certain remote configuration packets. Note that remote configuration is disabled by default in NTP. (CVE-2015-5146)

It was found that the :config command can be used to set the pidfile and driftfile paths without any restrictions. A remote attacker could use this flaw to overwrite a file on the file system with a file containing the pid of the ntpd process (immediately) or the current estimated drift of the system clock (in hourly intervals).
(CVE-2015-7703)

It was found that ntpd could crash due to an uninitialized variable when processing malformed logconfig configuration commands.
(CVE-2015-5194)

It was found that ntpd exits with a segmentation fault when a statistics type that was not enabled during compilation (e.g.
timingstats) is referenced by the statistics or filegen configuration command. (CVE-2015-5195)

It was discovered that sntp would hang in an infinite loop when a crafted NTP packet was received, related to the conversion of the precision value in the packet to double. (CVE-2015-5219)

A flaw was found in the way the ntp-keygen utility generated MD5 symmetric keys on big-endian systems. An attacker could possibly use this flaw to guess generated MD5 keys, which could then be used to spoof an NTP client or server. (CVE-2015-3405)

The remote Fedora 23 host has a package installed that is affected by multiple vulnerabilities as referenced in the FEDORA-2015-14213 advisory.

    Security fix for CVE-2015-5146, CVE-2015-5194, CVE-2015-5219, CVE-2015-5195, CVE-2015-5196

Tenable has extracted the preceding description block directly from the Fedora security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

SNTP processing would enter into an infinite loop when a crafted NTP packet was received. (CVE-2015-5219)

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2016-2583 advisory.

    - add disable monitor to default ntp.conf [CVE-2013-5211]
    - don't allow spoofed packet to enable symmetric interleaved mode       (CVE-2016-1548)
    - check mode of new source in config command (CVE-2016-2518)
    - make MAC check resilient against timing attack (CVE-2016-1550)
    - fix crash with invalid logconfig command (CVE-2015-5194)
    - fix crash when referencing disabled statistic type (CVE-2015-5195)
    - don't hang in sntp with crafted reply (CVE-2015-5219)
    - don't crash with crafted autokey packet (CVE-2015-7691, CVE-2015-7692,       CVE-2015-7702)
    - fix memory leak with autokey (CVE-2015-7701)
    - don't allow setting driftfile and pidfile remotely (CVE-2015-7703)
    - don't crash in ntpq with crafted packet (CVE-2015-7852)
    - check key ID in packets authenticated with symmetric key (CVE-2015-7974)
    - fix crash with reslist command (CVE-2015-7977, CVE-2015-7978)
    - don't allow spoofed packets to demobilize associations (CVE-2015-7979,       CVE-2016-1547)
    - don't accept server/peer packets with zero origin timestamp (CVE-2015-8138)
    - fix infinite loop in ntpq/ntpdc (CVE-2015-8158)

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for ntp fixes the following issues: ntp was updated to 4.2.8p9. Security issues fixed :

  - CVE-2016-9311, CVE-2016-9310, bsc#1011377: Mode 6     unauthenticated trap information disclosure and DDoS     vector.

  - CVE-2016-7427, bsc#1011390: Broadcast Mode Replay     Prevention DoS.

  - CVE-2016-7428, bsc#1011417: Broadcast Mode Poll Interval     Enforcement DoS.

  - CVE-2016-7431, bsc#1011395: Regression: 010-origin: Zero     Origin Timestamp Bypass.

  - CVE-2016-7434, bsc#1011398: NULL pointer dereference in
    _IO_str_init_static_internal().

  - CVE-2016-7429, bsc#1011404: Interface selection attack.

  - CVE-2016-7426, bsc#1011406: Client rate limiting and     server responses.

  - CVE-2016-7433, bsc#1011411: Reboot sync calculation     problem.

  - CVE-2015-5219: An endless loop due to incorrect     precision to double conversion (bsc#943216).
    Non-security issues fixed :

  - Fix a spurious error message.

  - Other bugfixes, see     /usr/share/doc/packages/ntp/ChangeLog.

  - Fix a regression in 'trap' (bsc#981252).

  - Reduce the number of netlink groups to listen on for     changes to the local network setup (bsc#992606).

  - Fix segfault in 'sntp -a' (bsc#1009434).

  - Silence an OpenSSL version warning (bsc#992038).

  - Make the resolver task change user and group IDs to the     same values as the main task. (bsc#988028)

  - Simplify ntpd's search for its own executable to prevent     AppArmor warnings (bsc#956365).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	名前	製品	ファミリー	公開日	更新日	深刻度
99822	EulerOS 2.0 SP1 : ntp (EulerOS-SA-2016-1060)	Nessus	Huawei Local Security Checks	2017/5/1	2025/12/22	high
95850	Scientific Linux Security Update : ntp on SL7.x x86_64 (20161103)	Nessus	Scientific Linux Local Security Checks	2016/12/15	2026/1/14	high
96173	openSUSE Security Update : ntp (openSUSE-2016-1525)	Nessus	SuSE Local Security Checks	2016/12/29	2026/1/7	medium
85751	Amazon Linux AMI : ntp (ALAS-2015-593)	Nessus	Amazon Linux Local Security Checks	2015/9/3	2020/6/22	high
86027	Fedora 23 : ntp (2015-14213)	Nessus	Fedora Local Security Checks	2015/9/21	2025/8/29	high
88026	F5 Networks BIG-IP : SNTP vulnerability (K60352002)	Nessus	F5 Networks Local Security Checks	2016/1/21	2019/1/4	high
94705	Oracle Linux 7 : ntp (ELSA-2016-2583)	Nessus	Oracle Linux Local Security Checks	2016/11/11	2025/8/29	high
95987	SUSE SLED12 / SLES12 Security Update : ntp (SUSE-SU-2016:3195-1)	Nessus	SuSE Local Security Checks	2016/12/21	2026/1/7	medium

検出

プラグインの検索

high

high

medium

high

high

high

high

medium