CentOS Linux 8.4 ホストには、TuxCare CENTOS8.4:CLSA-2026:1792979607アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: mrp: introduce active flags to prevent UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no this synchronization, there is a small probability that the cancellation will not be successful. And syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256 Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted 6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395 kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320 do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749 do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367 el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68 arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627 call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4 kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not restart. (CVE-2022-50697)

  - Linux カーネルでは、以下の脆弱性が解決されています: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0:
    htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0:
    failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG:
    KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059]
    __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69:
    0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated--- (CVE-2022-50880)

  - Linux カーネルでは、以下の脆弱性が解決されています: ubi: Fix use-after-free when volume resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi] ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record() returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume resizing. (CVE-2023-53800)

  - Linux カーネルでは、以下の脆弱性が解決されています: crypto: essiv - Handle EBUSY correctly As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. (CVE-2023-54046)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: avoid potential underflow in qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 (net: be more gentle about silly gso requests coming from user) virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec (net: virtio_net_hdr_to_skb: count transport header in UFO) while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 :
    gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm:
    b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI:
    0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09:
    ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS:
    000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES:
    0000 C ---truncated--- (CVE-2024-49949)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

Linux/Unix ホストには、ベンダーが提供するパッチが利用できない脆弱性の影響を受ける複数のパッケージがインストールされています。

  - PCI:dyn ID 削除と同時にプローブを実行する際の UAF を修正します。動的 ID は、dynids.lock が保持されている場合にのみ有効であることが保証されます。これは remove_id_store() がノードを解放できるためです。このため、pci_match_device() 内にコピーを作成します。
    また、id パラメーターがプローブ中にのみ有効であることを明確にします。(CVE-2026-90421)

Nessus は、ベンダーから報告されたパッケージの存在に依存していることに注意してください。

CentOS Linux 6ホストには、TuxCare CENTOS6:CLSA-2026:1791949745アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: HID: core: zero-initialize the report buffer Since the report buffer is used by all kinds of drivers in various ways, let's zero-initialize it during allocation to make sure that it can't be ever used to leak kernel memory via specially-crafted report. (CVE-2024-50302)

  - Linux カーネルでは、以下の脆弱性が解決されています: ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration. (CVE-2024-53197)

  - Linux カーネルでは、以下の脆弱性が解決されています: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. (CVE-2026-46243)

  - Linux カーネルでは、以下の脆弱性が解決されています: Bluetooth: serialize accept_q access bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket. (CVE-2026-52918)

  - Linux カーネルでは、以下の脆弱性が解決されています: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). (CVE-2026-53266)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

CentOS Linux 7ホストには、TuxCare CENTOS7:CLSA-2026:1792234299アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - 5.18.14までの Linux カーネルの net/netfilter/nfnetlink_queue.c の nfqnl_mangle により、リモートの攻撃者がサービス拒否 (パニック) を引き起こす可能性があります。これは、1 バイトの nfta_payload 属性を持つ nf_queue 判定の場合、skb_pull が負の skb-> len に遭遇する可能性があるためです。(CVE-2022-36946)

  - Linux カーネルでは、以下の脆弱性が解決されています: wifi: iwlwifi: mvm: Fix a memory corruption issue A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct ieee80211_channel'. So only 1 element is allocated in this array. When doing:
    mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the 'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void
    *)((u8 *)mvm->nvm_data->channels + 1); because of the (u8 *) cast, we add only 1 to the address of the beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just after. Remove the spurious casting so that the pointer arithmetic works as expected. (CVE-2023-52531)

  - Linux カーネルでは、以下の脆弱性が解決されています: KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O When completing emulation of instruction that generated a userspace exit for I/O, don't recheck L1 intercepts as KVM has already finished that phase of instruction execution, i.e. has already committed to allowing L2 to perform I/O. If L1 (or host userspace) modifies the I/O permission bitmaps during the exit to userspace, KVM will treat the access as being intercepted despite already having emulated the I/O access. Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation. Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the intended recipient) can reach the code in question. gp_interception()'s use is mutually exclusive with is_guest_mode(), and complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with EMULTYPE_SKIP. The bad behavior was detected by a syzkaller program that toggles port I/O interception during the userspace I/O exit, ultimately resulting in a WARN on vcpu->arch.pio.count being non-zero due to KVM no completing emulation of the I/O instruction. WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm] Modules linked in: kvm_intel kvm irqbypass CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm] PKRU: 55555554 Call Trace: <TASK> kvm_fast_pio+0xd6/0x1d0 [kvm] vmx_handle_exit+0x149/0x610 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm] kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
    __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0x5d/0xc60 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> (CVE-2025-40026)

  - Linux カーネルでは、以下の脆弱性が解決されています: Bluetooth: btusb: fix use-after-free on registration failure Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. (CVE-2026-64471)

  - Linux カーネルでは、以下の脆弱性が解決されています: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area.
    The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. (CVE-2026-64483)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

CentOS Linux 8.5 ホストには、TuxCare CENTOS8.5:CLSA-2026:1792979985アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: net: bridge: fix vlan tunnel dst refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm:
    ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP:
    0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08:
    0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
    00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge]
    __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
    __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2
    __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow (CVE-2021-47222)

  - Linux カーネルでは、以下の脆弱性が解決されています: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking.
    Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path. (CVE-2021-47223)

  - Linux カーネルでは、以下の脆弱性が解決されています: bpf: Guard stack limits against 32bit overflow This patch promotes the arithmetic around checking stack bounds to be done in the 64-bit domain, instead of the current 32bit. The arithmetic implies adding together a 64-bit register with a int offset.
    The register was checked to be below 1<<29 when it was variable, but not when it was fixed. The offset either comes from an instruction (in which case it is 16 bit), from another register (in which case the caller checked it to be below 1<<29 [1]), or from the size of an argument to a kfunc (in which case it can be a u32 [2]). Between the register being inconsistently checked to be below 1<<29, and the offset being up to an u32, it appears that we were open to overflowing the `int`s which were currently used for arithmetic. [1] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L7494-L7498 [2] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L11904 (CVE-2023-52676)

  - Linux カーネルでは、以下の脆弱性が解決されています: cifs: fix session state check in reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it complete the cifs_free_ipc() and logoff() and then delete itself from the list. (CVE-2023-53794)

  - Linux カーネルでは、以下の脆弱性が解決されています: ubi: Fix use-after-free when volume resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi] ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record() returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume resizing. (CVE-2023-53800)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

AlmaLinux 9.2 ホストには、TuxCare ALMALINUX9.2:CLSA-2026:1792243434アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

  - Linux カーネルでは、以下の脆弱性が解決されています: ethernet: hisilicon: hns:
    hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
    because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. (CVE-2021-47548)

  - Linux カーネルでは、以下の脆弱性が解決されています: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ?
    __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ?
    __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969]
    __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX:
    0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP:
    00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated--- (CVE-2023-52623)

  - Linux カーネルでは、以下の脆弱性が解決されています: dm: call the resume method on internal suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the hash_list entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the resume and postsuspend methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP:
    0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX:
    000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10:
    0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ?
    __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]--- (CVE-2024-26880)

  - Linux カーネルでは、以下の脆弱性が解決されています: netfilter: nf_tables: flush pending destroy work before exit_net release Similar to 2c9f0293280e (netfilter: nf_tables: flush pending destroy work before netlink notifier) to address a race between exit_net and the destroy workqueue. The trace below shows an element to be released via destroy workqueue while exit_net path (triggered via module removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014] print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ?
    __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ?
    __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ?
    __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10 [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690] ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726] kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750]
    __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953]
    ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120 [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019] kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036]
    __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221] ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236] unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list
    *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list);
    11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354 list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356 nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat
    ---truncated--- (CVE-2024-35899)

  - Linux カーネルでは、以下の脆弱性が解決されています: drm/client: Fully protect modes[] with dev->mode_config.mutex The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory. (CVE-2024-35950)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

ID	名前	製品	ファミリー	公開日	更新日	深刻度
372044	CentOS Linux 8.4 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-core/kernel-cross-headers/etcの複数の脆弱性(CENTOS8.4:CLSA-2026:1792979607)	Nessus	CentOS Local Security Checks	2026/10/26	2026/11/2	high
347382	Linux Distros のパッチ未適用の脆弱性: CVE-2026-90421	Nessus	Misc.	2026/9/18	2026/11/6	medium
367921	CentOS Linux 6 [TuxCare] セキュリティ更新プログラム:カーネル/kernel-abi-whitelists/kernel-debug/kernel-debug-devel/etcの複数の脆弱性(CENTOS6:CLSA-2026:1791949745)	Nessus	CentOS Local Security Checks	2026/10/20	2026/10/22	high
369489	CentOS Linux 7 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-debug/kernel-debug-devel/kernel-devel/etc 複数の脆弱性(CENTOS7:CLSA-2026:1792234299)	Nessus	CentOS Local Security Checks	2026/10/21	2026/10/21	high
371988	CentOS Linux 8.5 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-core/kernel-cross-headers/etcの複数の脆弱性(CENTOS8.5:CLSA-2026:1792979985)	Nessus	CentOS Local Security Checks	2026/10/26	2026/11/2	high
366778	AlmaLinux 9.2 [TuxCare] セキュリティ更新:bpftool/kernel/kernel-64k/kernel-64k-core/kernel-64k-debug/etc 複数の脆弱性(ALMALINUX9.2:CLSA-2026:1792243434)	Nessus	Alma Linux Local Security Checks	2026/10/17	2026/10/27	medium

検出

プラグインの検索

high

medium

high

high

high

medium