CentOS Linux 8.4 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-core/kernel-cross-headers/etcの複数の脆弱性(CENTOS8.4:CLSA-2025:1757961864)
high Nessus プラグイン ID 352831
Language:
概要
CentOS Linuxホストに1つ以上のセキュリティ更新プログラムがありません。説明
CentOS Linux 8.4 ホストには、TuxCare CENTOS8.4:CLSA-2025:1757961864アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。- Linux カーネルでは、以下の脆弱性が解決されています: can: peak_usb: fix use after free bugs After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue.
(CVE-2021-47670)
- Linux カーネルでは、以下の脆弱性が解決されています: scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it doesn't need to make forward progress under memory pressure. Marking this workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following warning: [ 14.506347] ------------[ cut here ]------------ [ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn [ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130 [ 14.506390] CPU: 0 PID: 8 Comm:
kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu [ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun [ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130 <-snip-> [ 14.506408] Call Trace: [ 14.506412] __flush_work+0xf1/0x1c0 [ 14.506414]
__cancel_work_timer+0x12f/0x1b0 [ 14.506417] ? kernfs_put+0xf0/0x190 [ 14.506418] cancel_delayed_work_sync+0x13/0x20 [ 14.506420] disk_block_events+0x78/0x80 [ 14.506421] del_gendisk+0x3d/0x2f0 [ 14.506423] sr_remove+0x28/0x70 [ 14.506427] device_release_driver_internal+0xef/0x1c0 [ 14.506428] device_release_driver+0x12/0x20 [ 14.506429] bus_remove_device+0xe1/0x150 [ 14.506431] device_del+0x167/0x380 [ 14.506432]
__scsi_remove_device+0x11d/0x150 [ 14.506433] scsi_remove_device+0x26/0x40 [ 14.506434] storvsc_remove_lun+0x40/0x60 [ 14.506436] process_one_work+0x209/0x400 [ 14.506437] worker_thread+0x34/0x400 [ 14.506439] kthread+0x121/0x140 [ 14.506440] ? process_one_work+0x400/0x400 [14.506441] ? kthread_park+0x90/0x90 [ 14.506443] ret_from_fork+0x35/0x40 [ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]--- (CVE-2022-49986)
- Linux カーネルでは、以下の脆弱性が解決されています: netfilter: nft_tproxy: restrict to prerouting hook TPROXY is only allowed from prerouting, but nft_tproxy doesn't check this. This fixes a crash (null dereference) when using tproxy from e.g. output. (CVE-2022-50001)
- Linux カーネルでは、以下の脆弱性が解決されています: ice: xsk: prohibit usage of non-balanced queue id Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a queue pair, e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of combined queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF:
supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID:
21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP:
0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX:
0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08:
000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12:
000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP:
0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX:
0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP:
000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11:
0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15:
0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc
---truncated--- (CVE-2022-50003)
- Linux カーネルでは、以下の脆弱性が解決されています: ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware boot It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3. (CVE-2022-50015)
Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。
ソリューション
TuxCareアドバイザリCENTOS8.4:CLSA-2025:1757961864のガイダンスに基づいて、影響を受けるパッケージを更新してください。参考資料
プラグインの詳細
深刻度: High
ID: 352831
ファイル名: tuxcare_centos_8.4_CLSA-2025-1757961864.nasl
バージョン: 1.2
タイプ: Local
エージェント: unix
ファミリー: CentOS Local Security Checks
公開日: 2026/9/30
更新日: 2026/10/1
サポートされているセンサー: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
リスク情報
VPR
リスクファクター: Critical
スコア: 9.4
パーセンタイル: 99.82
Vendor
Vendor Severity: Important
CVSS v2
リスクファクター: Medium
基本値: 6.8
現状値: 5.9
ベクトル: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS スコアのソース: CVE-2025-38464
CVSS v3
リスクファクター: High
基本値: 7.8
現状値: 7.5
ベクトル: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
現状ベクトル: CVSS:3.0/E:H/RL:O/RC:C
脆弱性情報
必要な KB アイテム: Host/OS/extended-third-party, Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list
エクスプロイトが利用可能: true
エクスプロイトの容易さ: Exploits are available
パッチ公開日: 2025/9/15
脆弱性公開日: 2020/11/4
CISA の既知の悪用された脆弱性の期限日: 2025/4/30, 2025/9/25
参照情報
CVE: CVE-2021-47103, CVE-2021-47670, CVE-2022-49986, CVE-2022-50001, CVE-2022-50003, CVE-2022-50015, CVE-2022-50020, CVE-2022-50070, CVE-2022-50083, CVE-2022-50127, CVE-2022-50133, CVE-2022-50181, CVE-2022-50187, CVE-2024-53150, CVE-2025-21727, CVE-2025-22058, CVE-2025-37890, CVE-2025-38000, CVE-2025-38052, CVE-2025-38079, CVE-2025-38085, CVE-2025-38159, CVE-2025-38177, CVE-2025-38200, CVE-2025-38211, CVE-2025-38250, CVE-2025-38273, CVE-2025-38332, CVE-2025-38350, CVE-2025-38352, CVE-2025-38464, CVE-2025-38477
CLSA: 2025:1757961864