CentOS Linux 7 [TuxCare] セキュリティ更新プログラム:カーネル/kernel-debug/kernel-debug-devel/kernel-devel/etcの複数の脆弱性(CENTOS7:CLSA-2025:1747260502)
high Nessus プラグイン ID 352874
Language:
概要
CentOS Linuxホストに1つ以上のセキュリティ更新プログラムがありません。説明
CentOS Linux 7ホストには、TuxCare CENTOS7:CLSA-2025:1747260502アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。- Linux カーネルでは、以下の脆弱性が解決されています: ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration. (CVE-2024-53197)
- Linux カーネルでは、以下の脆弱性が解決されています: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization. (CVE-2025-21920)
- Linux カーネルでは、以下の脆弱性が解決されています: Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd After the hci sync command releases l2cap_conn, the hci receive data work queue references the released l2cap_conn when sending to the upper layer. Add hci dev lock to the hci receive data work queue to synchronize the two. [1] BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837 CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci1 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline] l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline] l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline] hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5837: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726 hci_event_func net/bluetooth/hci_event.c:7473 [inline] hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 54:
kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline] hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated--- (CVE-2025-21969)
- Linux カーネルでは、以下の脆弱性が解決されています: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message. (CVE-2025-21993)
- Linux カーネルでは、以下の脆弱性が解決されています: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves struct ext4_dir_entry_2 *de point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in
__ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ?
__ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400]
__ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ?
__pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ?
__dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ?
__pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ?
__pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ?
__pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561]
__x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e (CVE-2025-37785)
Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。
ソリューション
TuxCareアドバイザリCENTOS7:CLSA-2025:1747260502のガイダンスに基づいて、影響を受けるパッケージを更新してください。参考資料
プラグインの詳細
深刻度: High
ID: 352874
ファイル名: tuxcare_centos_7_CLSA-2025-1747260502.nasl
バージョン: 1.1
タイプ: Local
エージェント: unix
ファミリー: CentOS Local Security Checks
公開日: 2026/9/30
更新日: 2026/9/30
サポートされているセンサー: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus
リスク情報
VPR
リスクファクター: High
スコア: 8.9
パーセンタイル: 99.7
Vendor
Vendor Severity: Important
CVSS v2
リスクファクター: Medium
基本値: 6.8
現状値: 5.6
ベクトル: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C
CVSS スコアのソース: CVE-2025-21969
CVSS v3
リスクファクター: High
基本値: 7.8
現状値: 7.2
ベクトル: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
現状ベクトル: CVSS:3.0/E:F/RL:O/RC:C
脆弱性情報
必要な KB アイテム: Host/OS/extended-third-party, Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list
エクスプロイトが利用可能: true
エクスプロイトの容易さ: Exploits are available
パッチ公開日: 2025/5/14
脆弱性公開日: 2024/12/27
CISA の既知の悪用された脆弱性の期限日: 2025/4/30
参照情報
CVE: CVE-2024-53197, CVE-2025-21920, CVE-2025-21969, CVE-2025-21993, CVE-2025-37785
CLSA: 2025:1747260502