CentOS Linux 7 [TuxCare] セキュリティ更新プログラム:bpftool/kernel/kernel-debug/kernel-debug-devel/kernel-devel/etcの複数の脆弱性(CENTOS7:CLSA-2026:1773056241)

high Nessus プラグイン ID 361774

概要

CentOS Linuxホストに1つ以上のセキュリティ更新プログラムがありません。

説明

CentOS Linux 7ホストには、TuxCare CENTOS7:CLSA-2026:1773056241アドバイザリに記載されている複数の脆弱性の影響を受けるパッケージがインストールされています。

- Linux カーネルでは、以下の脆弱性が解決されています: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300-0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace:
<TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd (CVE-2023-53259)

- Linux カーネルでは、以下の脆弱性が解決されています: Bluetooth: fix use-after-free in device_for_each_child() Syzbot has reported the following KASAN splat: BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0 Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980 CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 ? device_for_each_child+0x18f/0x1a0 print_report+0x13a/0x4cb ?
__virt_addr_valid+0x5e/0x590 ? __phys_addr+0xc6/0x150 ? device_for_each_child+0x18f/0x1a0 kasan_report+0xda/0x110 ? device_for_each_child+0x18f/0x1a0 ? __pfx_dev_memalloc_noio+0x10/0x10 device_for_each_child+0x18f/0x1a0 ? __pfx_device_for_each_child+0x10/0x10 pm_runtime_set_memalloc_noio+0xf2/0x180 netdev_unregister_kobject+0x1ed/0x270 unregister_netdevice_many_notify+0x123c/0x1d80 ? __mutex_trylock_common+0xde/0x250 ?
__pfx_unregister_netdevice_many_notify+0x10/0x10 ? trace_contention_end+0xe6/0x140 ?
__mutex_lock+0x4e7/0x8f0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x12/0xc0 ? unregister_netdev+0x12/0x30 unregister_netdevice_queue+0x30d/0x3f0 ?
__pfx_unregister_netdevice_queue+0x10/0x10 ? __pfx_down_write+0x10/0x10 unregister_netdev+0x1c/0x30 bnep_session+0x1fb3/0x2ab0 ? __pfx_bnep_session+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ?
__pfx_woken_wake_function+0x10/0x10 ? __kthread_parkme+0x132/0x200 ? __pfx_bnep_session+0x10/0x10 ? kthread+0x13a/0x370 ? __pfx_bnep_session+0x10/0x10 kthread+0x2b7/0x370 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x48/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 4974: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x1d1/0x440 hci_alloc_dev_priv+0x1d/0x2820 __vhci_create_device+0xef/0x7d0 vhci_write+0x2c7/0x480 vfs_write+0x6a0/0xfc0 ksys_write+0x12f/0x260 do_syscall_64+0xc7/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 4979: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x4f/0x70 kfree+0x141/0x490 hci_release_dev+0x4d9/0x600 bt_host_release+0x6a/0xb0 device_release+0xa4/0x240 kobject_put+0x1ec/0x5a0 put_device+0x1f/0x30 vhci_release+0x81/0xf0 __fput+0x3f6/0xb30 task_work_run+0x151/0x250 do_exit+0xa79/0x2c30 do_group_exit+0xd5/0x2a0 get_signal+0x1fcd/0x2210 arch_do_signal_or_restart+0x93/0x780 syscall_exit_to_user_mode+0x140/0x290 do_syscall_64+0xd4/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when an underlying (kobject) reference counter is greater than 1. This means that reparenting (happened when the device is actually freed) is delayed and, during that delay, parent controller device (hciX) may be deleted. Since the latter may create a dangling pointer to freed parent, avoid that scenario by reparenting to NULL explicitly. (CVE-2024-53237)

- Linux カーネルでは、以下の脆弱性が解決されています: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. (CVE-2024-58014)

- Linux カーネルでは、以下の脆弱性が解決されています: partitions: mac: fix handling of bogus partition table Fix several issues in partition probing: - The bailout for a bad partoffset must use put_dev_sector(), since the preceding read_part_sector() succeeded. - If the partition table claims a silly sector size like 0xfff bytes (which results in partition table entries straddling sector boundaries), bail out instead of accessing out-of-bounds memory. - We must not assume that the partition table contains proper NUL termination - use strnlen() and strncmp() instead of strlen() and strcmp().
(CVE-2025-21772)

- Linux カーネルでは、以下の脆弱性が解決されています: net: ppp: Add bound checking for skb data on ppp_sync_txmung Ensure we have enough data in linear buffer from skb before accessing initial bytes. This prevents potential out-of-bounds accesses when processing short packets. When ppp_sync_txmung receives an incoming package with an empty payload: (remote) gef p *(struct pppoe_hdr *) (skb->head + skb->network_header) $18 = { type = 0x1, ver = 0x1, code = 0x0, sid = 0x2, length = 0x0, tag = 0xffff8880371cdb96 } from the skb struct (trimmed) tail = 0x16, end = 0x140, head = 0xffff88803346f400 4, data = 0xffff88803346f416 :\377, truesize = 0x380, len = 0x0, data_len = 0x0, mac_len = 0xe, hdr_len = 0x0, it is not safe to access data[2]. [[email protected]: fixed subj typo] (CVE-2025-37749)

Nessus はこれらの問題をテストしておらず、代わりにアプリケーションが自己報告するバージョン番号にのみ依存していることに注意してください。

ソリューション

TuxCareアドバイザリCENTOS7:CLSA-2026:1773056241のガイダンスに基づいて、影響を受けるパッケージを更新してください。

参考資料

https://cve.tuxcare.com/els/releases/CLSA-2026:1773056241

http://www.nessus.org/u?0bf0ab7c

プラグインの詳細

深刻度: High

ID: 361774

ファイル名: tuxcare_centos_7_CLSA-2026-1773056241.nasl

バージョン: 1.1

タイプ: Local

エージェント: unix

公開日: 2026/10/1

更新日: 2026/10/1

サポートされているセンサー: Continuous Assessment, Nessus Agent, Tenable Cloud Security, Tenable Self-Hosted Container Security, Nessus

リスク情報

VPR

リスクファクター: High

スコア: 7.6

パーセンタイル: 98.58

Vendor

Vendor Severity: Important

CVSS v2

リスクファクター: Medium

基本値: 6.8

現状値: 5

ベクトル: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C

CVSS スコアのソース: CVE-2025-39911

CVSS v3

リスクファクター: High

基本値: 7.8

現状値: 6.8

ベクトル: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

現状ベクトル: CVSS:3.0/E:U/RL:O/RC:C

脆弱性情報

必要な KB アイテム: Host/OS/extended-third-party, Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list

エクスプロイトの容易さ: No known exploits are available

パッチ公開日: 2026/3/9

脆弱性公開日: 2023/3/21

参照情報

CVE: CVE-2023-53259, CVE-2024-53237, CVE-2024-58014, CVE-2025-21772, CVE-2025-37749, CVE-2025-37780, CVE-2025-37923, CVE-2025-38102, CVE-2025-38249, CVE-2025-38724, CVE-2025-39853, CVE-2025-39860, CVE-2025-39911, CVE-2025-39973, CVE-2025-39993, CVE-2025-40240, CVE-2025-40248, CVE-2025-40277, CVE-2025-40304, CVE-2025-40322

CLSA: 2026:1773056241